Table of Contents
Advertisement
Item
Key Management
Local ID
Remote ID
6.1.1.6
IKE Phase
Item
Negotiation
Default setting: Main
Mode
Mode
X‐Auth
Default setting: None
206 of 359
© NetComm Wireless 2019
Notes
Mandatory field.
Select Key Management from the dropdown box for this IPSec tunnel.
Pre‐shared Key 8 to
IKE+Pre‐shared Key – user needs to set a key (8 - 32 characters).
32 characters.
IKE+X.509 – user needs Certificate to authenticate. IKE+X.509 will be
Manually – user needs to enter key ID to authenticate.
Optional setting.
Specify the Local ID for this IPSec tunnel to authenticate:
User Name – The username may include letters and numbers,
but cannot be all numbers.
FQDN – Enter the FQDN.
User@FQDN – Enter the User@FQDN.
Key ID – The Key ID can be letters and/or numbers.
Optional setting.
Specify the Remote ID for this IPSec tunnel to authenticate.
User Name – The username may include letters and numbers,
but cannot be all numbers.
FQDN – Enter the FQDN.
User@FQDN – Enter the User@FQDN.
Key ID – The Key ID can be letters and/or numbers.
Table 140 – IPSec Authentication
Figure 240 – IPSec IKE Phase
Notes
Description
available only when Certificate has been configured properly.
Refer to Certificate section of this manual and also Object
Definition > Certificate in web‐based utility.
Manual key configuration will be explained in the following
Manual Key Management section.
Note – Remote ID will be not available when Dynamic VPN
option in Tunnel Scenario is selected.
Choose Main Mode or Aggressive Mode
Specify the X‐Auth role for this IPSec tunnel: Select Server, Client, or
None
None – No X‐Auth authentication is required.
Description
User Guide
Advertisement
Table of Contents
