Table of Contents
Advertisement
7.3.1
FTP Server Configuration
To access the FTP Server Configuration screen, select FTP from the Administration submenu.
Item
FTP
FTP Port
Timeout
Max. Connections
per IP
302 of 359
© NetComm Wireless 2019
Figure 346 – FTP Server Configuration
Notes
Check Enable box to activate the embedded FTP Server
Disabled by default.
function.
With the FTP Server enabled, you can retrieve or delete
the stored log files via this FTP connection.
Port 21 is the default
Specify a port number for FTP connection.
setting.
The router will listen for incoming FTP connections on the
specified port.
Value Range = 1 - 65535.
300 seconds is the
Specify the maximum timeout interval for the FTP
default setting.
connection.
Supported range = 60 to 7200 seconds (i.e. one minute –
two hours)
2 Clients are the default
Specify the maximum number of clients from the same IP
setting.
address for the FTP connection.
Up to 5 clients from the same IP address are supported.
Description
Note – The embedded FTP Server is only for
downloading log files. There is no write access
for the user to upload files.
User Guide
Advertisement
Table of Contents
