NetComm NTC-400 Series User Manual page 222

Item
Local Endpoint IP
Address
Remote
Endpoint IP
Address
Static Key
Encryption Cipher Default setting:
Hash Algorithm
LZO Compression Default setting:
Persis Key
Persis Tun
Advanced
Configuration
Tunnel
Save
Undo
Back
When Advanced Configuration is selected, the OpenVPN Client Advanced Configuration section is displayed.
222 of 359
© NetComm Wireless 2019
Notes
Local Endpoint IP Address, Remote Endpoint IP Address and Static Key
will be displayed.
Mandatory field. Specify the virtual Local Endpoint IP Address of this OpenVPN
router.
Value Range: The IP format is 10.8.0.x, the range of x is 1 - 254.
Mandatory field. Specify the virtual Remote Endpoint IP Address of the peer OpenVPN
router.
Value Range: The IP format is 10.8.0.x, the range of x is 1 - 254.
Mandatory field. Specify the Static Key.
Specify the Encryption Cipher.
Blowfish
It can be Blowfish/AES‐256/AES‐192/AES‐128/None.
Default setting: SHA‐1 Specify the Hash Algorithm.
Available settings: SHA‐1, MD5, MD4, SHA2‐256, SHA2‐512, None or
Disable
Specify the LZO Compression scheme.
Adaptive
Available settings: Adaptive, YES, NO or Default
Check  Enable to activate the Persis Key function.
Optional setting.
Enabled by default.
Check  Enable to activate the Persis TUN function.
Optional setting.
Enabled by default.
Button Click the Edit button to specify the Advanced Configuration setting
for the OpenVPN serve in the Advanced Configuration section.
Check  Enable to activate this OpenVPN tunnel.
Disabled by default.
Button Click Save to save the settings.
Button Click Undo to cancel the changes.
Button Click Back to return to last page.
Table 153 – OpenVPN Client Configuration
Description
Note – Local Endpoint IP Address will be available only when
Static Key is chosen in Authorization Mode.
Note – Remote Endpoint IP Address will be available only
when Static Key is chosen in Authorization Mode.
Note – Static Key will be available only when Static Key is
chosen in Authorization Mode.
User Guide