Table of Contents
Advertisement
Item
Application Filter
Log Alert
Save
Undo
6.2.5.3
Create/Edit Application Filter Rules
When Enable is selected, the buttons on the Application Filter List section become active.
Click on the Add button to create a new rule in the list. You can add up to twenty (20) Application Filter rules.
Item
Rule Name
Mandatory field.
String format.
Source IP
Mandatory field.
Default setting: Any
NTC-400 Series
Notes
Check Enable to activate the Application Filter
Checkbox, disabled by
default.
functionality.
Check Log Alert to activate event logging for the
Disabled by default
selected rules.
Button
Click Save to save the setting.
Button
Click Undo to cancel the changes to settings.
Table 178 – Enable Application Filter
Figure 296 – Application Filter List
Figure 297 – Application Filter Rule Configuration
Notes
Enter a meaningful name of up to 30 characters for the Application Filter
rule.
This field is to specify the Source IP address.
Select Any to filter packets coming from any IP addresses.
Select Specific IP Address to filter packets coming from an IP address
entered in this field.
Select IP Range to filter packets coming from a specified range of IP
address entered in this field.
Description
Description
© NetComm Wireless 2019
257 of 359
Advertisement
Table of Contents
