Table of Contents
Advertisement
3.4.1.2
IPv6 Configuration Setting
Navigate to Basic Network > IPv6 > Configuration.
The IPv6 Configuration setting allows you to set the IPv6 connection type to access the IPv6 network.
Item
IPv6
Disabled by default.
WAN Connection
Only can be selected when
Type
IPv6 is Enabled.
Mandatory field.
3.4.1.3
Static IPv6 WAN Type Configuration
Item
IPv6 Address
Subnet Prefix Length Mandatory field.
Default Gateway
Primary DNS
Secondary DNS
MLD Snooping
114 of 359
© NetComm Wireless 2019
Figure 131 – IPv6 Configuration
Notes
Check the Enable box to activate the IPv6 function.
Define the selected IPv6 WAN Connection Type to establish the IPv6
connectivity.
Select Static IPv6 when your ISP provides you with a set of IPv6 addresses.
Then go to Static IPv6 WAN Type Configuration.
Select DHCPv6 when your ISP provides you with DHCPv6 services.
Select PPPoEv6 when your ISP provides you with PPPoEv6 account settings.
Select 6to4 when you want to use an IPv6 connection over IPv4.
Select 6in4 when you want to use an IPv6 connection over IPv4.
Table 74 – IPv6 Configuration
Figure 132 – Static IPv6 WAN Type Configuration
Notes
Mandatory field.
Mandatory field.
An optional field.
An optional field.
Disabled by default. Enable/Disable the MLD Snooping function.
Table 75 – Static IPv6 WAN Type Configuration
Description
Description
Enter the WAN IPv6 Address for the router.
Enter the WAN Subnet Prefix Length for the router.
Enter the WAN Default Gateway IPv6 address.
Enter the WAN primary DNS Server.
Enter the WAN secondary DNS Server.
User Guide
Advertisement
Table of Contents
