NetComm NTC-400 Series User Manual page 217

Item
OpenVPN Disabled by default.
Server
Protocol Mandatory field.
Default setting: TCP
Port Mandatory field.
Default setting: 4430
Tunnel Scenario Mandatory field.
Default setting: TUN
Authorization Mandatory field.
Mode
Default setting: Static
Key
Local Endpoint Mandatory field.
IP Address
Remote Mandatory field.
Endpoint IP
Address
Static Key Mandatory field.
Server Virtual Mandatory field.
IP
NTC-400 Series
Notes
Click  Enable to activate OpenVPN Server functions.
Select the Protocol for connecting to the OpenVPN Server: TCP or UDP
TCP – The TCP protocol will be used to access the OpenVPN Server, and
Port will be automatically set at 4430.
UDP – The UDP protocol will be used to access the OpenVPN Server, and
Port will be automatically set at 1194.
Specify the Port for connecting to the OpenVPN Server.
Value Range: 1 - 65535.
Specify the type of Tunnel Scenario for connecting to the OpenVPN
Server. It can be TUN for TUN tunnel scenario, or TAP for TAP tunnel
scenario.
Select the authorization mode for the OpenVPN Server: TLS or Static
Key
TLS – OpenVPN will use TLS authorization mode, and the following items
CA Cert., Server Cert. and DH PEM will be displayed.
The CA Cert. can be generated in Object Definition > Certificate >
Trusted Certificate.
The Server Cert. can be generated in Object Definition >
Certificate > My Certificate.
Static Key – The OpenVPN will use static key (pre‐shared) authorization
mode, and the following parameters are displayed: Local Endpoint
IP Address, Remote Endpoint IP Address and Static Key
Note – Static Key will be available only when TUN is chosen in
Tunnel Scenario.
Specify the virtual Local Endpoint IP Address of this OpenVPN router.
Value Range: The IP format is 10.8.0.x, the range of x is 1 - 254.
Note – Local Endpoint IP Address will be available only when
Static Key is chosen in Authorization Mode.
Specify the virtual Remote Endpoint IP Address of the peer OpenVPN
router.
Value Range: The IP format is 10.8.0.x, the range of x is 1 - 254.
Note – Remote Endpoint IP Address will be available only
when Static Key is chosen in Authorization Mode.
Specify the Static Key.
Note – Static Key will be available only when Static Key is chosen
in Authorization Mode.
Specify the Server Virtual IP.
Value Range: The IP format is 10.y.0.0, the range of y is 1 - 254.
Note – Server Virtual IP will be available only when TLS is chosen
in Authorization Mode.
Description
© NetComm Wireless 2019
217 of 359