NetComm NTC-400 Series User Manual page 100

Item Notes
Lazy Mode Enabled by
default.
Green AP Disabled by
default.
VAP Isolation Enabled by
default.
Multiple AP Mandatory field.
Names
VAP1 and VAP8
are activated by
default.
Time Schedule Mandatory field.
Network ID String format
(SSID)
Enabled by
default.
STA Isolation Enabled by
default.
Channel Mandatory field.
Default setting:
Auto
100 of 359
© NetComm Wireless 2019
Figure 116 – WDS Hybrid Mode
Check  Enable to activate this function. With this function enabled, the device can
automatically learn of WDS peers without manually entering other AP's MAC address, but
at least one of the APs has to fill the remote AP MAC addresses.
Check  Enable to activate the Green AP function. Green AP attempts to optimise wireless
throughput and power consumption.
Check  Enable to activate this function.
By default, the box is checked; it means that stations which are associated to different VAPs
cannot communicate with each other.
Multiple AP Names (VAP) - The device supports up to 8 virtual SSIDs.
Select one of VAP to configure its setting at a time.
Enable - Check the enable box to activate the selected VAP.
Max. STA - Limit the maximum number of client stations. Check this box and enter a
limitation. The box is unchecked (unlimited) by default.
Apply a specific Time Schedule to this rule; otherwise leave it as (0) Always.
If the dropdown list is empty, ensure Time Schedule is pre-configured. Refer to Object
Definition > Scheduling > Configuration tab.
Enter the SSID for the VAP, and decide whether to broadcast the SSID or not.
The SSID is used for identifying the wireless network from another AP, and client stations
will associate with the AP according to the SSID. If the broadcast SSID option is enabled, it
means the SSID will be broadcasted, and the stations can associate with this device by
scanning for available SSIDs.
Check  Enable to activate this function.
The default setting does not allow stations which are associated to the same VAP to
communicate with each other.
Select a radio channel for the VAP. Each channel corresponds to a different radio band. The
permissible channels depend on the Regulatory Domain.
There are two available options when Auto is selected:
Description
User Guide