Scenario - Managing Deployed Gateways Through An Acs Server - NetComm NTC-400 Series User Manual

7.1.2.1

Scenario - Managing deployed gateways through an ACS Server

Scenario Application Timing
When the enterprise data centre wants to use an ACS server to manage remote routers geographically distributed elsewhere
in the world, the routers in all branch offices must have an embedded TR-069 agent to communicate with the ACS server so
that the ACS server can configure, upgrade firmware and monitor these gateways and their corresponding Intranets.
Scenario Description
The ACS server can configure, upgrade the firmware and monitor these routers. Remote gateways contact the ACS server for
jobs to do in each time period. The ACS server can ask the gateways to execute some urgent jobs.
Parameter Setup Example
The following tables list the parameter configuration as an example for Router 1 in the above diagram with "TR-069"
enabled. Use default values for those parameters that are not mentioned in the tables.
Configuration Path
TR-069
ACS URL
ACS User Name
ACS Password
ConnectionRequest Port
ConnectionRequest User Name
ConnectionRequest Password
Inform
Scenario Operation Procedure
In the diagram above, the ACS server can manage multiple gateways on the Internet. "Router 1" is one of them and has
118.18.81.33 IP address for its WAN-1 interface.
NTC-400 Series
Figure 312 – Managing deployed gateways through an ACS Server
■ Enable
http://qantc.acslite.com/cpe.php
ACSUserName
ACSPassword
8099
ConnReqUserName
ConnReqPassword
■ Enable Interval 900
[TR-069]-[Configuration]
275 of 359
© NetComm Wireless 2019