Table of Contents
Advertisement
Item
USSD Command
USSD Response
8.1.5
Network Scan
The Network Scan function allows an administrator to specify how to connect the device to the mobile system for data
communication in each 3G/4G interface. For example, administrator can specify the mobile system, 2G, 3G or LTE, used for a
connection and can set the router to automatically connect to the mobile system. The Administrator can also manually scan
the mobile systems, select a target system and apply it. The manual scanning approach is often used for diagnostics.
8.1.5.1
Network Scan Setting
To access the Network Scan settings and tools:
1
Select Cellular Toolkit from the Service submenu and click the Network Scan tab.
2
The Network Scan page contains two sections relating to the USSD functionality:
8.1.5.2
Configuration
The Configuration section contains settings for network scans.
Item
Physical Interface
SIM Status
Network Type
322 of 359
© NetComm Wireless 2019
Notes
Text entry box.
The USSD Command string of the selected profile will be shown
here.
buttons
Click the Send button to send the USSD command, and the USSD
Response screen will appear.
You will see the response message of the corresponding service,
receive the service SMS.
The Clear button will cause the USSD Response text box to
disappear.
Table 232 – USSD Profile Configuration
Figure 374 – Network Scan Configuration
Notes
Default setting:
Choose a cellular interface (3G/4G-1 or 3G/4G-2) for the
3G/4G-1
network scan service.
System generated
The system displays the SIM card (identified with SIM_A or
SIM_B) associated with the selected cellular service.
Default setting:
Specify the network type for the network scan function.
Auto
Auto – When Auto is selected, the network will be register
automatically;
2G prefer or 3G prefer – If the 'prefer' option is selected,
network will be registered for your chosen option first;
Description
Description
User Guide
Advertisement
Table of Contents
