NetComm NTC-400 Series User Manual page 221

Item
OpenVPN Client Mandatory field.
Name
Interface Mandatory field.
Default setting: WAN‐1
Protocol Mandatory field.
Default setting: TCP
Port Mandatory field.
Default setting: 443
Tunnel Scenario Mandatory field.
Default setting: TUN
Remote IP/FQDN Mandatory field.
Remote Subnet Mandatory field.
Redirect Internet Optional setting.
Traffic
Disabled by default.
NAT Optional setting.
Disabled by default.
Authorization Mandatory field.
Mode
Default setting: TLS
NTC-400 Series
Notes
The OpenVPN Client Name will be used to identify the client in the
tunnel list.
Value Range: 1 - 32 characters.
Define the physical interface to be used for this OpenVPN Client
tunnel.
Select the Protocol for connecting to the OpenVPN Client: TCP or
UDP
TCP – The TCP protocol will be used to access the OpenVPN Client,
and Port will be automatically set at 4430.
UDP – The UDP protocol will be used to access the OpenVPN Client,
and Port will be automatically set at 1194.
Specify the Port for the OpenVPN Client to use.
Value Range: 1 - 65535.
Specify the type of Tunnel Scenario for the OpenVPN Client to use. It
can be TUN for TUN tunnel scenario, or TAP for TAP tunnel
scenario.
Specify the Remote IP/FQDN of the peer OpenVPN Server for this
OpenVPN Client tunnel.
Fill in the IP address or FQDN.
Specify Remote Subnet of the peer OpenVPN Server for this
OpenVPN Client tunnel.
Fill in the remote subnet address and remote subnet mask.
Check  Enable to activate the Redirect Internet Traffic function.
Check  Enable to activate the NAT function.
Specify the authorization mode for the OpenVPN Server.
TLS
‐>The OpenVPN will use TLS authorization mode, and the following
items CA Cert., Client Cert. and Client Key will be displayed.
CA Cert. could be selected in Trusted CA Certificate List. Refer to
Object Definition > Certificate > Trusted Certificate.
Client Cert. could be selected in Local Certificate List. Refer to Object
Definition > Certificate > My Certificate.
Client Key could be selected in Trusted Client key List. Refer to Object
Definition > Certificate > Trusted Certificate.
Static Key
‐>The OpenVPN will use static key authorization mode, and the
following items
Description
© NetComm Wireless 2019
221 of 359