Create/Edit Ips Rules - NetComm NTC-400 Series User Manual

Item
IPS
Log Alert
Save
Undo
6.2.6.3

Create/Edit IPS Rules

When IPS  Enable is selected, the checkboxes and parameter text boxes on the Intrusion Prevention section become
active. Select the intrusion activities that you want to monitor.
Item
SYN Flood Defense
UDP Flood Defense
260 of 359
© NetComm Wireless 2019
Figure 299 – Enable IPS
Notes
Checkbox, disabled by
default.
Disabled by default
Button
Button
Figure 300 – Intrusion Prevention Parameters
Notes
Click  Enable to activate this intrusion prevention rule and enter the
Mandatory field.
traffic threshold in this field.
Disabled by default.
Value Range: 10 - 10000
Default setting: 300
Click  Enable to activate this intrusion prevention rule and enter the
Mandatory field.
traffic threshold in this field.
Disabled by default.
Value Range: 10 - 10000
Default setting: 300
Check  Enable to activate the Intrusion Prevention
System functionality.
Check  Enable to activate event logging for the
selected threats and activities.
Click Save to save the setting.
Click Undo to cancel the changes to settings.
Table 180 – Enable IPS
Description
Description
User Guide