Notifying Events - NetComm NTC-400 Series User Manual

Table 242 – Managing Event Configuration
8.2.3

Notifying Events

The Notifying Events settings allow administrator to define the relationships (rules) between event triggers and handlers.
Notifying Events functionality is disabled by default, to enable this tool select Event Handling from the Service submenu and
click on the Notifying Events tab.
Figure 391 – Enable Notifying Events
Item Notes Description
Click  Enable to activate the Notifying Events functionality.
Notifying Events Disabled by default.
Table 243 – Enable Notifying Events
The Notifying Event List supports a maximum of 128 rules.
Figure 392 – Notifying Event List
Click the Add button and the Notifying Event Configuration screen will display.
Figure 393 – Notifying Event Configuration
NTC-400 Series 331 of 359
© NetComm Wireless 2019