NetComm NTC-400 Series User Manual page 332

Item
Event Digital Input (or WAN) by
default
Description Any text.
Action No default selection.
Time Schedule Default setting = (0)
Always
Notifying Disabled by default.
Events
332 of 359
© NetComm Wireless 2019
Notes
Specify the Event type and then define its corresponding event
configuration.
The supported Event Types include:
Digital Input – Select Digital Input and a DI profile from the drop-down
list of DI profiles you defined in the Event Handling Configuration
window;
WAN – Select WAN and then select a trigger condition from its
associated drop-down list;
LAN&VLAN – Select LAN&VLAN and then select a trigger condition
from its associated drop-down list;
Wi-Fi – Select Wi-Fi and then select a trigger condition from its
associated drop-down list;
DDNS – Select DDNS and then select a trigger condition from its
associated drop-down list;
Administration – Select Administration and then select a trigger
condition from its associated drop-down list of possible
administration events;
Modbus – Select Modbus and a Modbus Notifying Event profile you
defined to specify a certain Modbus Event;
Data Usage – Select Data Usage, then select one of the SIM Cards
(Cellular Service) and then set a percentage of Data Usage (1% -
100%) as the trigger condition;
Note – Available Event Types can differ between products.
Write a brief, meaningful description of the event rule.
Specify at least one action to take when the expected event is
triggered:
Digital Output – Select Digital Output checkbox and a DO profile you
defined as the action for the event;
SMS – Select SMS, and the router will send out a SMS to all the defined
SMS accounts as the action for the event;
Syslog – Select Syslog and select/unselect the  Enable checkbox;
SNMP Trap – Select SNMP Trap, and the router will send out a SNMP
Trap to the defined SNMP Event Receivers as the action for the
event;
Email Alert – Select Email Alert and the router to send out an Email to
the defined Email accounts as the action for the event;
Note – Available Actions can differ between products.
Set a time scheduling rule for the Notifying Event.
Click Enable to activate this Notifying Event functionality.
Description
User Guide