NetComm NTC-400 Series User Manual page 107

Item Notes
MAC Address Mandatory field.
MAC Address
string format.
Priority Optional field.
Default setting: 16
Enabled by default. Click  Enable to activate this profile.
Enable
Save Button
Undo Button
Back Button
Instead of manually entering the information for the uplink network, you can also click the Scan button to get the available
wireless networks around the device, and select one as the uplink network.
When the Scan button is applied, the Wireless AP List is displayed after a few seconds.
When you have selected an AP from the AP list, the Channel, SSID, Authentication, Encryption, and MAC address will be
automatically completed in the profile. If required, you must enter a key for the uplink connection.
NTC-400 Series
TKIP – TKIP was proposed instead of WEP without upgrading hardware. Enter a Pre-shared
Key for it. The length of the key is from 8 to 63 characters.
AES – The newest encryption system in Wi-Fi. This is also designed for the fast 802.11n high
bitrates schemes. Enter a Pre-Shared Key. The length of the key is from 8 to 63
characters.
We recommend that you use AES encryption for security as it is the most secure.
TKIP / AES - TKIP / AES mixed mode – Client stations can associate with this device via TKIP
or AES.
Enter a Pre-Shared Key. The length of the key is from 8 to 63 characters.
Specify the MAC Address of the access point (with the Network ID) to connect to.
Specify a priority setting for the uplink profile when the By User-defined methodology is
selected. The priority value can be 1 - 16. 1 is the highest priority, and 16 is the lowest
priority).
Click the Save button to save the configuration.
Click the Undo button to restore what you just configured back to the previous setting.
When the Back button is clicked, the screen will return to the Profile List page.
Table 73 – Create/Edit Uplink Profile - Profile Configuration
Figure 124 – Wireless AP List
Description
© NetComm Wireless 2019
107 of 359