Table of Contents
Advertisement
Item
Event Management
8.2.1.2
Enable SMS Management
To use the SMS management function, you must nominate an SMS message prefix that triggers the Event Handler to treat
the message in a specific way.
8.2.1.3
SMS Configuration
Item
Message Prefix
Physical Interface
SIM Status
Delete Managed
SMS after
Processing
8.2.1.4
Create / Edit SMS Account
Setup an SMS Account for managing the router through the SMS. It supports up to a maximum of 5 accounts.
8.2.1.5
SMS Account Configuration
Click the Add / Edit button to configure the SMS account.
NTC-400 Series
Notes
Disabled by default. Check the Enable box to activate the Event
Management function.
Table 235 – Enable Event Management
Figure 379 – Enable SMS Management
Notes
Disabled by default. Check the Enable box to activate the SMS prefix for
validating the received SMS.
Once the function is enabled, enter the text of the prefix in
the text box.
The received managing events SMS must have the
designated prefix as an initial identifier, then corresponding
handlers will become effective for further processing.
Default setting:
Choose a cellular interface (3G/4G-1 or 3G/4G-2) to handle
3G/4G-1
the SMS messaging.
System generated.
Show the connected cellular service (identified with SIM_A
or SIM_B).
Disabled by default. Check Enable to delete the received managing event
SMS after it has been processed.
Table 236 – Enable SMS Management
Figure 380 – SMS Account List
Description
Description
© NetComm Wireless 2019
325 of 359
Advertisement
Table of Contents
