Wireless Client List; Select Target Wi-Fi; Show Client List - NetComm NTC-400 Series User Manual

Item Notes
Save Button
Undo Button
Apply Button
3.3.2

Wireless Client List

The Wireless Client List page shows the information of wireless clients which are associated with this device.
Go to Basic Network > Wi-Fi > Wireless Client List Tab.
3.3.2.1

Select Target Wi-Fi

Item Notes
Operation Band (mandatory
field)
Multiple AP Mandatory field.
Names
Default setting:
All
3.3.2.2

Show Client List

The following Client List shows the information for wireless clients that are associated with the selected VAP(s).
Item
IP Address Configuration & Address It shows the Client's IP address and the method that it was obtained.
Host Name
MAC Address
102 of 359
© NetComm Wireless 2019
TKIP / AES - TKIP / AES mixed mode. Client stations can associate with this device via TKIP or
AES. Enter a Pre-Shared Key. The length of the key is from 8 to 63 characters.
Click the Save button to save the current configuration.
Click the Undo button to restore configuration to previous setting before saving.
Click the Apply button to apply the saved configuration.
Table 67 – WDS Hybrid Mode
Figure 117 – Target Wi-Fi
Specify the intended operation band for the Wi-Fi module.
Specify the VAP to show the associated clients information in the following Client List. By
default, All VAPs are selected.
Figure 118 – Target Wi-Fi
Figure 119 – Client List
Dynamic means the IP address is derived from a DHCP server.
Static means the IP address is a fixed one that is self-filled by the client.
Displays the host name of the client.
Displays the MAC address of the client.
Description
Description
Description
User Guide