Table of Contents
Advertisement
Item
Server Virtual IP
IP Pool Starting
Address
IP Pool Ending
Address
Authentication
Protocol
MPPE Encryption
Service Port
Save
Undo
6.1.3.5
L2TP Server Status list
After the L2TP server has been set up L2TP clients connected to it will be listed in the L2TP Server Status list:
The following details of each connected L2TP client are listed: User Name, Remote IP, Remote Virtual IP, Remote Call ID and
current Actions
Click the Refresh button to renew the
6.1.3.6
L2TP User Accounts
The User Account List contains details of L2TP user accounts that are able to establish remote L2TP VPN connections to
the router. Up to ten (10) User Accounts can be created.
Click Add button to add user account in the User Account Configuration screen:
NTC-400 Series
Notes
This will require a preshared key to be entered.
8 (min) - 32 (max) characters
Mandatory field.
Enter the L2TP server Virtual IP Address to set this L2TP server as the
local virtual IP.
Mandatory field.
Enter the L2TP server starting IP of the virtual IP pool.
Default setting: 10
This sets the starting IP which is assigned to L2TP clients.
Value Range: 1 - 254
Mandatory field.
Enter the L2TP server ending IP of the virtual IP pool.
Default setting: 17
This sets the ending IP which is assigned to L2TP clients.
Value Range: >= Starting Address, and < (Starting Address + 8) or 254
Mandatory field.
Select single or multiple Authentication Protocols for the L2TP server
with which to authenticate L2TP clients.
Available authentication protocols include: PAP, CHAP, MS‐CHAP or
MS‐CHAP v2
Mandatory field.
Specify whether to support MPPE Protocol.
Check Enable to enable MPPE and from dropdown box select: 40 bits,
56 bits or 128 bits
Mandatory field.
Specify the Service Port which L2TP server use.
Value Range: 1 - 65535
Button
Click Save to save the settings.
Button
Click Undo to cancel the changes.
Table 156 – L2TP Server Configuration
Figure 261 – L2TP Server Status list
L2TP client information.
Description
Note – when MPPE Encryption is enabled, the Authentication
Protocol PAP / CHAP options will not be available.
227 of 359
© NetComm Wireless 2019
Advertisement
Table of Contents
