Configure Sim-A / Sim-B Card - NetComm NTC-400 Series User Manual

3.1.2.7

Configure SIM-A / SIM-B Card

Here you can configure the cellular connection profile.
Note – The configuration of SIM-B Card is the same as SIM-A. SIM-A Card is shown here as an example.
Item Notes
Network Type Mandatory field.
Default setting: Auto
Dial-Up Profile Mandatory field.
Default setting: Auto-
detection
APN Mandatory field.
PIN code String format: integer
NTC-400 Series
Figure 64 – Connection with SIM-A Card
Select Auto to register on a network automatically, regardless of the network type. The
NTC-400 Series Router will give preference to high-speed networks.
Select 2G Only to register the 2G network only.
Select 2G Prefer to register the 2G network first if it is available.
Select 3G only to register the 3G network only.
Select 3G Prefer to register the 3G network first if it is available.
Select LTE only to register the LTE network only.
Note – Options may be different due to the specification of the module.
Specify the type of connection profile for your 3G/4G network. It can be Manual-
configuration, APN Profile List, or Auto-detection.
Select Manual-configuration to set APN (Access Point Name), Dial Number, Account,
and Password to what your carrier provides.
Select APN Profile List to set more than one profile to attempt to connect to in order
until the connection is established.
Select Auto-detection to automatically select the best configuration by detecting the
SIM card and comparing it to the list on the router.
Enter the APN you want to use to establish the connection.
If Dial-up profile is set to Manual configuration, this field must be completed.
Enter the PIN (Personal Identification Number) code if required to unlock your SIM card.
Description
© NetComm Wireless 2019
59 of 359