Create/Edit Sim-A / Sim-B Apn Profile List - NetComm NTC-400 Series User Manual

Item Notes
Authentication Mandatory field.
Default setting: Auto
IP Mode Mandatory field.
Default setting:
Dynamic IP
Primary DNS String format: IP
address (IPv4 type)
Secondary String format: IP
DNS address (IPv4 type)
Roaming Disabled by default.
3.1.2.8

Create/Edit SIM-A / SIM-B APN Profile List

You can add a new APN profile for the connection, or modify the content of the APN profile you added. It is available only
when you select Dial-Up Profile as APN Profile List.
The SIM-A APN Profile List displays all the APN profiles you have created. It is available only when you select Dial-Up Profile
as APN Profile List.
When Add button is applied, an APN Profile Configuration screen will appear.
60 of 359
© NetComm Wireless 2019
Select either PAP (Password Authentication Protocol) or CHAP (Challenge Handshake
Authentication Protocol) to authenticate with the carrier's server.
When Auto is selected, it means it will authenticate with the server using either PAP or
CHAP.
When Dynamic IP is selected, all IP configuration is taken from the carrier's server and
set on the device automatically.
If your carrier has provided you with a Static IP, you can switch to Static IP mode and fill
in all required parameters.
Note – IP Subnet Mask is Mandatory field.
Enter the IP address to change the primary DNS (Domain Name Server) setting. If it is
not filled-in, the server address is given by the carrier while connecting.
Enter the IP address to change the secondary DNS (Domain Name Server) setting. If it is
not filled-in, the server address is given by the carrier while connecting.
Check the box to establish a connection on other networks if a home network is not
available.
Note – Enabling this function may incur additional charges by your carrier.
Table 43 – Connection with SIM-A / SIM-B Card
Table 44 – SIM-A / SIM-B APN Profile List
Figure 65 – SIM-A / SIM-B APN Profile Configuration
Description
User Guide