Lan Configuration; Pppoev6 Wan Type Configuration - NetComm NTC-400 Series User Manual

3.4.1.6

LAN Configuration

Item
Global Address
Link-local Address Value auto-created Show the link-local address for LAN interface of router.
Navigate to Address Auto-configuration (summary) to set the LAN environment.
3.4.1.7

PPPoEv6 WAN Type Configuration

Item Notes
Account Mandatory
field.
Password Mandatory
field.
Service Name Mandatory
field.
Connection Fixed value
Control
MTU Mandatory
field.
MLD Snooping Disabled by
default.
116 of 359
© NetComm Wireless 2019
Figure 135 – LAN Configuration
Notes
Value auto-created Enter the LAN IPv6 Address for the router.
Table 78 – LAN Configuration
Figure 136 – PPPoEv6 WAN Type Configuration
Enter the Account to set up a PPPoEv6 connection. If you want more information, please
contact your ISP. Value Range: 0 - 45 characters.
Enter the Password to set up a PPPoEv6 connection. If you want more information, please
contact your ISP.
Enter the Service Name to set up a PPPoEv6 connection. If you want more information, please
contact your ISP. Value Range: 0 - 45 characters.
The value is Auto-reconnect(Always on).
Enter the MTU to set up a PPPoEv6 connection. If you want more information, please contact
your ISP. Value Range: 1280 - 1492.
Enable/Disable the MLD Snooping function
Table 79 – PPPoEv6 WAN Type Configuration
Description
Description
User Guide