Advertisement
TR-069 ACS Server Configuration
There are many options available for selecting an Auto Configuration Server including commercial and open source offerings. In this
white paper, for the purpose of demonstrating how to perform a device firmware upgrade via TR-069, the Netmania Auto
Configuration Server was chosen. The exact procedures and steps may vary depending on your chosen ACS. For privacy reasons,
the login credentials to the management URL of the ACS Server in this white paper has been replaced with
http://xxx.xxx.xxx/management/
name, password and CPE TR-069 Connection Request user name and password used in this white paper are for test purposes
only.
Prior to configuring the M2M CDMA Router, the device product class name and serial number must be registered on the Auto
Configuration Server.
Login to the ACS management URL
ACS server management URL:
Username: xxxx
Password: xxxx
Create the Device Model on ACS server
1.
Navigate to Home > Manage Device Types
2.
Navigate to Home > Manage Device Models > Add Device Type
When creating a device model on the ACS, the OUI and the product class need to match the settings shown in Figure 3 below.
M2M CDMA Router – TR-069 Whitepaper
6
and the CPE connection URLs were replaced with http://xxx.xxx.xxx/cpe.php. The ACS user
http://xxx.xxx.xxx/management/
Figure 2: Manage Device Types option
Figure 1: Add Device Type link
www.netcommwireless.com
Advertisement
