Dhcp Configure Dhcp Server - NetComm NTC-6000 Series Command Manual

^DHCP Configure DHCP server
This command performs configures the NTC DHCP server.
Default: ^DHCP: 192.168.20.100,192.168.20.199,86400,,
Storage: Automatic
Command values:
^DHCP= <First IP address>,<Last IP address>,<Lease Time>,<DNS1>,<DNS2>
Where:
< First IP address >
< Last IP address >
< Lease Time >
<DNS1>
<DNS2>
If none of the above parameters are supplied the DHCP is disabled.
^DHCP? Queries DHCP configuration
Where:
< First IP address >
< Last IP address >
< Lease Time >
<DNS1>
<DNS2>
NTC-6000 Series V.250 Manual
To suit software version 1.1.0
First IP address in IP address pool
Last IP address in IP address pool
DHCP Lease time in seconds
Primary DNS server IP address
Primary DNS server IP address
First IP address in IP address pool
Last IP address in IP address pool
DHCP Lease time in seconds
Primary DNS server IP address
Secondary DNS server IP address
Page 25 of 32
7/21/2010