Networking; Wireless Wan; Data Connection - NetComm NTC-220 User Manual

Networking

The Networking section provides configuration options for Wireless WAN, LAN, Wireless settings, Ethernet
WAN/LAN interface assignment, PPPoE, WAN failover priorities, Routing and VPN connectivity.

Wireless WAN

Data connection

The data connection page allows you to configure and enable/disable connection profiles. To access this page,
click on the Networking menu, and under the Wireless WAN menu, select the Data connection item.
Each profile refers to a set of configuration items which are used by the router to activate a Packet Data (PDP)
context. Under normal scenarios, you may have a single profile enabled. Multiple profiles can be used for simple
fast-switching of PDP settings such as APN, or for advanced networking configuration where multiple simultaneous
PDP contexts may be required.
I T E M
Profile name
Default
Status
APN
Username
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 22 – Data connection settings
Sets the corresponding profile to be the default gateway for all outbound
traffic except traffic for which there are configured static route rules or
profile routing settings.
Toggles the corresponding profile on and off. Only one profile may be
turned on at any time.
The APN configured for the corresponding profile.
The username used to log on to the corresponding APN.
Table 11 – Data connection item details
D E F I N I T I O N
30 of 193
© NetComm Wireless 2019