Management; Advanced > Wan - NetComm NB8WVPN User Manual

9.Advanced
9.1 Advanced > WAN
Clicking on the 'Advanced' menu displays the following:
This screen provides a summary of the current WAN interfaces you have configured. If you have connected the
NB8WVPN to ADSL through the ADSL Quick Setup interface, details of the connection will be summarised here.
Setting up a WAN profile goes through a set of steps which establishes connection parameters covering the following:
Field
VPI/VCI
Con. ID
Category
Service
Interface
Protocol
IGMP
QoS
VLAN ID
State
Once settings are entered, click Save. Connection status can be checked under Status>Diagnostics.
YML8WVPN 8WVPN
www.netcomm.com.au
Means
Always 8/35 in Australia
Sequence number of connection (e.g. 1,2...)
ATM Service Category; leave as default
Name of connection: give this a name you will recognise (e.g. ISP name)
Current WAN interface name
Bridge or Router Mode
Enable/Disable IGMP proxy
Enable/Disable QoS
The VLAN ID of this PVC
Enable/Disable this WAN connection
ADSL2+ VPN Router
NB8WVPN User Guide NB8WVPN User Guide NB8WVPN User Guide NB8WVPN User Guide