Toshiba e-STUDIO556 Service Manual page 1163

Sub
05/08 Mode Element
element
08 Setting System User interface
Mode
08 Setting Counter Counter
Mode
08 Setting System General
Mode
08 Setting System General
Mode
08 Setting System General
Mode
08 Setting System General
Mode
e-STUDIO556/656/756/856
Item Subitem Code
9016
9017
9022
9023
9025
9026
Sub- Default Acceptable
Details
code value value
Counter installed 0 0-5
externally
Setting for counter 1 0-7
installed externally
Production process 99 0-99
management status
for easy setup
Trial period setting 254 1~60
Notifying condition of 3 0~255
trial period end
Notifying address of 3 0~3
trial period end
104
RAM Contents
M 0: No external counter
1: Coin controller
2: Totalizer/Key card (This value is valid only when "2"
is set for 08-9000.)
3: Key counter
5: Coin controller supporting ACS/mixed-size (The
value of 08-4131 is set to "1")
* "4" cannot be set.
M Selects the job to count up for the external counter.
0: Not selected
1: Copier
2: Fax
3: Copier/Fax
4: Printer
5: Copier/Printer
6: Fax/Printer
7: Copier/Fax/Printer
SYS Perform this code when an error occurs during the easy
setup (unpacking manual adjustment) and you want to
finish the easy setup, or when the error is canceled and
you want to restart the unpacking manual adjustment.
0: Packing mode finished (before unpacking is started)
1: Auto-toner adjustment finished
2: Toner cartridge is installed
3: Forcible image quality control finished
4: Automatic gamma adjustment finished
99: All the unpacking adjustments finished
SYS Sets the trial period from 1 to 60 days. This setting is
effective only when the default value is "254". Once the
default value is set, this value is only used for a
reference.
SYS Sets when the end of trial period is notified. 0: On the
day it ends 1 to 255: n days before
SYS Sets where the end of the trial period is to be notified. 0:
OFF 1: User 2: Service center 3: User and service
center
Proce Servic
dure e UI
1
1
1
1 Yes
1 Yes
1 Yes