Administration Task Summary (For The S8300 Media Server); Supported Ethernet Interfaces - Avaya G700 Installation And Upgrades

7 Connecting Telephones and Adjunct Systems:
Administration Task Summary (for the S8300
Media Server)
On the SAT interface of the S8300 Media Server with G700 Media Gateway, follow these steps:
1 . Type display system-parameters customer-options. Go to page 4 and make sure that Processor
Ethernet is enabled.
2 . Type display ip-interfaces, and make sure the PROCR is administered and its Ethernet port is
enabled. If the PROCR is not listed (PROCR should appear in the Type option field), add the
PROCR.
To administer CTI links:
1 . Use the display system-parameters customer-options command and make sure the following
option is set to yes:
Co-Res DEFINITY LAN GATEWAY
2 . Use the add cti-link command to administer a CTI link.
3 . Use the change ip-services command and specify a Service Type of DLG.
When Service Type DLG is entered, the system adds a DLG Administration page as the last of the
form.
4 . Complete the DLG Administration page to add your client information.
Note: A CTI link must be administered before a link number can be entered. For more
information and detailed procedures, refer to "Avaya MultiVantage™ Release 11
CallVisor

Supported Ethernet Interfaces

Table 16 summarizes Ethernet interfaces used by several current switching platforms:
Table 16. Ethernet Interfaces
Platform
DEFINITY Servers csi, si,
and r
Avaya S8100 Media
Server (formerly
DEFINITY ONE/IP600)
Avaya S8300 Media
Server with Avaya G700
Media Gateway
246
®
ASAI Technical Reference, 555-230-220".
Processor
Ethernet
Interface?
No
Yes
Yes
Installation and Upgrades for the G700 with an S8300/S8700
ASAI Co- Resident DEFINITY LAN Gateway (DLG)
(y)
C-LAN
(TN799)
Ethernet
Interface
Yes
Yes
No
555-234-100 — Issue 2 — October 2002