Chapter 5: Configuring the G350
The G350 requires software configuration. The G350 can be configured using:
The Avaya Installation Wizard (Avaya IW). Avaya IW is a wizard that prompts you for all
●
configurations required to complete the installation of the G350. Avaya IW is used only to
configure a G350 with an S8300. Refer to
Wizard (Avaya IW)
The Gateway Installation Wizard (GIW). The GIW is a wizard that prompts you for all
●
configurations required to complete the installation of the G350. You can run GIW to
configure a G350 without an S8300. Refer to
Installation Wizard (GIW)
The Avaya G350 Command Line Interface (CLI). The CLI is a comprehensive tool for
●
configuring the gateway and includes all supported configuration tasks. For information
about configuration using the CLI, see Administration for the Avaya G250 and Avaya G350
Media Gateways, 03-300436. For detailed information on CLI commands, refer to the
Avaya G250 and Avaya G350 CLI Reference, 03-300437.
The G350 can be configured at the customer site via a laptop connected to the CON port of the
G350 or from a remote location via a modem. For information about connecting and enabling a
modem, refer to
on page 149.
on page 201.
Chapter 4: Connecting and enabling a modem for remote access
Appendix C: Running the Avaya Installation
Appendix D: Running the Gateway
on page 61.
Issue 4 February 2007
79