10. Mkr/Analysis Block; 11. Test Port - Agilent Technologies ENA Series User Manual

Overview of Functions
Front Panel: Names and Functions of Parts

10. MKR/ANALYSIS Block

A group of keys used for analyzing the measurement results by using the markers, fixture
simulator, etc. For functions of the keys in the MKR/ANALYSIS block, see Chapter 2
"Overview of Functions" in the User's Guide.

11. Test Port

A port to which the DUT is connected. Option 213 and 214 each has two ports, Option 314
and 314 each has three ports, and Options 413 and 414 each has four ports. While signals
are being output from a test port, the yellow LED above the test port lights up.
Connector type: 50 W, N-type, female
CAUTION Do not apply a DC voltage or current to the test port. Applying a DC voltage or current
may lead to device failure. In particular, there is a possibility of the capacitor remaining
charged. Connect the measurement sample (DUT) to the test port (or the test fixture,
cables, etc. connected to the test port) after the analyzer has been completely discharged.
The test ports comply with Installation Category I of IEC 61010-1.
32
Displays the Marker softkey menu on the right side of the
Key
screen. Manipulating the Marker menu enables you to
turn the markers on/off and move them by entering
stimulus values. You can place up to 10 markers on each
trace.
Displays the Marker Search softkey menu on the right
Key
side of the screen. Manipulating the Marker Search menu
enables you to move a marker to a specific point
(maximum, minimum, peak, and a point with a target
value) on a trace. You can also find the bandwidth
parameters (up to six) and display them.
Displays the Marker Function softkey menu on the right
Key
side of the screen. Manipulating the Marker Function
menu enables you to not only specify the marker sweep
range and coupling of markers on a channel but also
display statistics data on traces.
Displays the Analysis softkey menu on the right side of
Key
the screen. Manipulating the Analysis menu enables you
to use the analytical function called the fixture simulator.
Chapter 2