Table of Contents
Advertisement
Quick Start Guide
Names and Descriptions of E5070/E5071A parts
10. MKR/ANALYSIS Block
A group of keys used for analyzing measurement results through markers, the fixture
simulator function, etc. For more information on the keys in the MKR/ANALYSIS Block,
see Chapter 2 "Overview of Functions" in the E5070/E5071A User's Guide.
11. Test Port
While the signal is being output from a test port, the yellow LED above the test port lights
up. The connector type adopted is the 50 W-based N-type (female) connector.
12. Front USB Port
Used to connect a printer, a multiport test set or an ECal module compatible with the USB
(Universal Serial Bus). Using a USB port allows the accessories to be connected after the
E5070/E5071A has been powered on.
Display Area
The names and short description of the E5070/E5071A parts on the display area are shown
as follows.
Figure 3-2
Display area
1. Menu Bar
Using a menu bar, you can perform the same operations as when using the keys in the
ACTIVE CH/TRACE Block, RESPONSE Block, STIMULUS Block, MKR/ANALYSIS
Block, and INSTR STATE Block on the front panel of the E5070/E5071A.
Chapter 3
41
Advertisement
Table of Contents
