Table of Contents
Advertisement
Installation
Daily Maintenance
Self-test When Turning on the Power
When the power is turned on, the E5070A/E5071A automatically performs a self-test. If
any error is detected by the self-test at power-on, the error message "Power on test fail"
appears in the instrument status bar. This causes the E5070A/E5071A to enter the service
mode. When being in the service mode, ship the E5070A/E5071A to the nearest Agilent
Technologies Service Center by seeing Section "Considerations When Shipping to a
Service Center Due to Breakdown or Other Problem" on page 36.
Considerations When Shipping to a Service Center Due to Breakdown
or Other Problem
When shipping the E5070A/E5071A to an Agilent Technologies Service Center because of
breakdown or other problem, for shipment use the packing box and shock-absorbing
material used to package the analyzer or static-protective package that replaces them. For
your nearest Agilent Technologies Service Center, contact the Agilent Technologies
Customer Center shown at the end of the Manual.
36
Chapter 2
Advertisement
Table of Contents
