Limit Test
Limit Test
Defining the Limit Line
To use the limit test, you must first define the limit line. You can define a limit table for
each trace, and you can define up to 100 limit lines (segments) in a limit table.
Defining a Segment
The following steps describe how to define a segment.
Step 1. Press
will be used.
Step 2. Press
used.
Step 3. Press
Step 4. Press
Step 5. Press
create/edit a segment. Initially, no segments are entered in the limit table.
Figure 10-2
Limit Table
220
or
or
to activate the trace on which the limit test function will be
to display the Analysis menu.
to display the softkeys associated with the limit test.
Limit Test
to display the limit table shown in Figure 10-2. Using the limit table,
Edit Limit Line
to activate the channel on which the limit test function
Chapter 10