Creating A Limit Line - Agilent Technologies NFA Series Quick Reference Manual

Step 1. Press the
Step 2. Press the
Figure 3-1
Step 3. Enter the first Frequency value. Press the
Step 4. Enter the first Y-axis unit value. This value needs to calculated from the
Step 5. Repeat this process until the limit line is defined.
NOTE
Advanced Features
Setting up Limit Lines

Creating a Limit Line

Limit Lines
menu key.
Editor
Limit Line Table
scale you are using to display the trace. Press the
Connected set to Yes connects the points to form a continous line. To
disconnect any points, set Connected to
the arrow keys.
The limit line is now defined. Press the
return to the limit line menu. To save a limit line table you save it as a
limit line choosing which limit line number you want. See "Saving a File"
on page 15.
54
key and select the limit line you want to create.
No
Prev
key.
Tab
key.
Tab
for the points(s) by pressing
key or key to
Limit Line
Chapter 3