Replaceable Parts
Assembly Replacement Procedure
Assembly Replacement Procedure
The following steps describe how to replace an assembly in the analyzer.
Step 1. Identify the faulty group. Begin with
with the appropriate troubleshooting chapter that identifies the faulty assembly.
Step 2. Order a replacement assembly. Refer to this chapter for part numbers and
ordering information.
Step 3. Replace the faulty assembly and determine what adjustments and performance
tests are necessary. Refer to
Step 4. Perform the necessary adjustments. Refer to
Step 5. Perform the necessary performance tests. Refer to
Adjustments."
6-4
Chapter 4, "Troubleshooting."
Chapter 7, "Repair and Replacement Procedures."
Chapter 3, "Tests and Adjustments."
RF Vector Network Analyzer
Follow up
Chapter 3, "Tests and
Service Guide N9923-90005
N9923AN