Procedure To Execute System Recovery (For Serial Number Jp1Kh And A27 That Has Never Been Replaced) - Agilent Technologies E4991A Service Manual

Procedure to execute system recovery (for serial number JP1KH and
A27 that has never been replaced)
Step 1. Connect the external keyboard to the E4991A.
Step 2. Insert the system recovery disk (furnished with the E4991A) in the floppy disk drive of the
E4991A.
Step 3. Turn the E4991A on.
Step 4. Press
Display as shown in Figure B-1 is displayed after RAM counting.
Figure B-1 AMIBIOS System Configuration Display
The contents of the system recovery disk are loaded while Figure B-2 is displayed. After a
short time, the system recovery start screen as shown in Figure B-3 is displayed.
Appendix B
System Recovery (for serial prefix JP1KH, JP2KH, and MY432)
key on the external keyboard as soon as the AMI BIOS System Configuration
[F]
System Installation for A27 Mass Storage
315