1.
Click Trace A or Trace B
2.
Click Coupled Markers
3.
Notice the following:
Markers on the unselected trace move to the x-axis position of the selected trace.
If a marker number on the unselected trace has no corresponding marker on the selected trace, no
movement occurs for that marker.
4.
Click Reset to run the model again. There is no Reset for coupled markers on the PNA.
Marker Display
The marker display dialog allows you to change how markers and the associated readout is displayed on the PNA
screen. Several marker display features also apply to
How to change marker display settings
Right-click on a marker readout, then click Marker Display or:
Using front-panel
[softkey] buttons
HARDKEY
1.
Press M
ARKER
2.
then [Properties]
3.
then [Marker Display]
Statistics
display.
Using a mouse with PNA Menus
1.
Click Marker/Analysis
2.
then Marker
3.
then Marker Display
492