Jumper Settings For Swt 3000 Modules; General Information; Jumper Settings For Ifc Modules; Overview - Siemens SWT 3000 Equipment Manual

Installation and Commissioning

3.3 Jumper Settings for SWT 3000 Modules

3.3 Jumper Settings for SWT 3000 Modules

General Information

3.3.1
NOTE
i
i
The program SWTStraps can be used as a graphical utility to find the correct jumper settings for the SWT
3000 modules. The program is supplied with the PowerSys DVD in folder \Utilities.
For details refer to chapter
3.3.2

Jumper Settings for IFC Modules

3.3.2.1

Overview

[scjumper-220513-01.tif, 1, en_US]
Figure 3-6
(1) LED H1 to H4 (red): activated outputs
LED H5 to H8 (green): activated inputs
(2) Test Operation Display (H10)
(3) S2: IFC Slot Address Selection (S2.1, S2.2) and PU3 / PU4 switch:
S2.3: closed/down - PU3
S2.3: open/up - PU4
(4) Jumpers X43 to X58
(5) Operating LED (H9)
110
5.7 SWTStraps for Jumper Settings
Position of Jumpers for the IFC-Modules
and following.
Smart Communication, SWT 3000 Teleprotection, Equipment Manual
C53000-G6040-C605-1, Edition 03.2020