Event] - Keysight Technologies P Series Programming Manual

[:EVENt]?

This query returns a 16 bit decimal-weighted number representing the bits set in
the Event Register of the SCPI Register Set you require to control. The format of
the return is <NR1> in the range of 0 to 32767 (2
the register to 0.
Syntax
:ENABle <NRf>|<non-decimal numeric>
This command sets the Enable Register of the particular SCPI Register Set you
require to control. The parameter value, when rounded to an integer and
expressed in base 2 has its first 15 bits written into the Enable Register of the SCPI
Register Set concerned. The last bit (bit 15) is always set to 0.
Syntax
Keysight N8262A Programming Guide
?
:EVEN
space
:ENAB
15
–1). This query clears all bits in
NRf
non-decimal numeric
?
STATus Subsystem 11
423