Dot1X Initialize; Dot1X Login; Dot1X Max-Req; Dot1X Port-Control - D-Link DWL-8500AP Command Reference Manual

dot1x initialize

This command begins the initialization sequence on the specified port. This command is only
valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error
will be returned.
Format
Mode

dot1x login

This command assigns the specified authentication login list to the specified user for 802.1x
port security. The
must be a configured authentication login list.
Format
Mode

dot1x max-req

This command sets the maximum number of times the authenticator state machine on this port
will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. The
value must be in the range 1 - 10.
<count>
Default
Format
Mode
no dot1x max-req
This command sets the maximum number of times the authenticator state machine on this port
will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant.
Format
Mode

dot1x port-control

This command sets the authentication mode to use on the specified port. Select
to specify that the authenticator PAE unconditionally sets the controlled port to
unauthorized
unauthorized. Select
sets the controlled port to authorized. Select
controlled port mode to reflect the outcome of the authentication exchanges between the
supplicant, authenticator and the authentication server.
Default
Format
Mode
dot1x initialize <slot/port>
Privileged EXEC
parameter must be a configured user and the
<user>
dot1x login <user> <listname>
Global Config
2
dot1x max-req <count>
Interface Config
no dot1x max-req
Interface Config
force-authorized
auto
dot1x port-control {force-unauthorized | force-authorized |
auto}
Interface Config
to specify that the authenticator PAE unconditionally
to specify that the authenticator PAE sets the
auto
Port-Based Network Access Control Commands
2 Switching Commands
parameter
<listname>
force-
75