Show Dot1X - D-Link DWS-1008 Cli Reference Manual

DWS-1008 CLI Reference Guide
Defaults:
Access:
Usage:
Examples:
DWS-1008# set dot1x wep-rekey disable
success: wep rekeying disabled
set dot1x wep-rekey-period
Sets the interval for rotating the WEP broadcast and multicast keys.
Syntax:
seconds
Defaults:
Access:
Examples:
DWS-1008# set dot1x wep-rekey-period 300
success: dot1x wep-rekey-period set to 300

show dot1x

Displays 802.1X client information for statistics and configuration settings.
Syntax:
clients
stats
config
D-Link Systems, Inc.
WEP key rotation is enabled, by default.
Enabled.
Reauthentication is not required for WEP key rotation to take place.
Broadcast and multicast keys are always rotated at the same time, so all members
of a given radio, VLAN, or encryption type receive the new keys at the same
time.
Type the following command to disable WEP key rotation:
set dot1x wep-rekey-period seconds
Specify a value between 30 and 1,641,600
(19 days).
The default is 1800 seconds (30 minutes).
Enabled.
Type the following command to set the WEP-rekey period to 300 seconds:
show dot1x {clients | stats | config}
Displays information about active 802.1X clients,
including client name, MAC address, and state.
Displays global 802.1X statistics associated with
connecting and authenticating.
Displays a summary of the current configuration.
802.1x Management Commands
321