Management > Snmp > Snmp Community Table Settings - D-Link DGS-1100-08PLV2 Manual

4 Configuration
read and modify the settings of gateways, routers, switches, and other networks. Use SNMP to configure
system features for proper operation, monitor performance and detect potential problems in the Switch or
LAN.
This panel allows the user to configure the SNMP settings, used for managing and monitor devices on the
network.
The fields that can be configured are described below:
Item
SNMP Global Settings
SNMP Global State
Trap Settings
Trap Global State
SNMP Authentication
Trap
Port Link Up
Port Link Down
Coldstart
Warmstart
Click Apply to make the configurations take effect.
Management > SNMP > SNMP Community Table Settings
This window is used to create an SNMP community string to define the relationship between the SNMP
manager and an agent. The community string acts like a password to permit access to the agent on the
Switch.
Figure 4.23 - Management > SNMP > SNMP Global Settings
Description
Specify to enable or disable the SNMP feature. The default
setting is Disabled.
Enable or disable SNMP trap notifications from client devices.
Disabling this option means no trap signals will be sent. When
enabling this option, you may choose the type of SNMP traps
to enable.
Check this feature to enable authentication traps. When a
client device fails to authenticate with the SNMP server, and
authentication trap will be sent to the management station.
Check this feature to enable Link Up traps. Whenever a device
changes status from 'link down' to 'link up', it will send a Link
Up trap to the management station.
Check this feature to enable Link Down traps. Whenever a
device changes status from 'link up' to 'link down', it will send a
Link Down trap to the management station.
Check this feature to have client devices send an SNMP
notification to the management station when performing a cold
start.
Check this feature to have client devices send an SNMP
notification to the management station when performing a
warm start.
Table 4.8
D-Link Smart Managed Switch User Manual
1 1 9 9