Bgp Clear Settings - D-Link DGS-3620-52P Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Peer Established
Trap State
Peer Idle Trap State
Click the Apply button to accept the changes made for each individual section.

BGP Clear Settings

This window is used to reset the Border Gateway Protocol (BGP) connections using hard or soft reconfigurations.
To view the following window, click L3 Features > BGP > BGP Clear Settings, as shown below:
The fields that can be configured are described below:
Parameter
Type
IP Address
AS Number (1-65535)
Peer Group Name
Mode Option
Click the Apply button to accept the changes made for each individual section.
Description
Enable or disable the sending of the peer established trap. The default value is
Disabled.
Enable or disable the sending of the peer idle trap. The default value is Disabled.
Figure 5-13144 BGP Clear Settings window
Description
Use the drop-down menu to select IP Address, AS, Peer Group, External, or All.
IP Address - Specify to reset the session with the specified neighbor.
AS - Specify to reset sessions with BGP peers in the specified Autonomous System.
Peer Group - Specify to reset a peer group.
External - Specify all eBGP sessions will be reset.
All - Specify that all current BGP sessions will be reset.
If IP Address is selected in the Type drop-down menu, enter an IP address.
If AS is selected in the Type drop-down menu, enter an Autonomous System number.
If Peer Group is selected in the Type drop-down menu, enter a peer group name.
Tick the desired mode option: Soft, In, Prefix Filter or Out.
Soft – This initiates a soft reset. It does not tear down the session.
In – This iInitiates inbound reconfiguration. If neither in nor out keywords are specified,
both inbound and outbound sessions are reset.
Prefix Filter – The local site configured prefix filter will be notified to the remote
neighbor when inbound soft reset is applied.
Out – This initiates outbound reconfiguration.
249