Master Cylinder Assembly - Suzuki Wagon R Manual

MASTER CYLINDER ASSEMBLY

[A]
[A]
[B]
[A]: with ABS
[B]: without ABS (for right-hand steering vehicle)
[B]
: Tightening Torque
CAUTION:
D Never disassemble master cylinder. Disassembly will
spoil its original performance. If faulty condition is found,
replace it with new one.
D Observe CAUTION at the beginning of ON-VEHICLE SER-
VICE.
REMOVAL
1) Clean around master cylinder and reservoir.
2) Disconnect reservoir lead wire at coupler (1).
3) Remove reservoir cap (2) and take out fluid with syringe or such.
4) Disconnect brake pipes (3) from master cylinder (4).
For RH steering vehicle not equipped with ABS, disconnect
pipes from master cylinder by using special tool.
Special Tool
(A): 09950-78240
5) Remove master cylinder attaching nuts (5).
6) Remove master cylinder from brake booster.
7) Remove reservoir pin (1) and reservoir (2) by using special tool.
Special Tool
(A): 09922-85811
BRAKES PIPE / HOSE / MASTER CYLINDER 5A-9
1. Master cylinder assembly
2. Grommet
3. O-ring
4. Pin washer retainer
5. Reservoir
[A]: with ABS
[B]: without ABS