Suzuki Wagon R Manual page 277

5B-6 FRONT BRAKE
INSTALLATION
CAUTION:
Observe CAUTION at the beginning of ON-VEHICLE SER-
VICE.
1) Install pads (1).
NOTE:
Install pad with sensor (2) to vehicle center side.
2) Install caliper (1) and torque caliper pin bolts (2) to specification.
Tightening Torque
.
(a): 30 N m (3.0 kg-m, 22.0 lb-ft)
NOTE:
Make sure that boots (3) are fit into groove securely.
3) Torque front wheel nuts to specification.
Tightening Torque
.
(b): 85 N m (8.5 kg-m, 61.5 lb-ft)
4) Upon completion of installation, perform brake test.