Suzuki Wagon R Manual page 296

1
2
3) Install shoe hold down springs (2) by pushing them down in
place and turning hold down pins (1).
4) For procedure hereafter, refer to steps 3) to 12) of BRAKE
DRUM INSTALLATION in this section.
WHEEL CYLINDER
REMOVAL
1) Perform steps 1) to 5) of BRAKE DRUM REMOVAL.
2) Perform steps 2) to 4) of BRAKE SHOE REMOVAL.
3) Loosen brake pipe flare nut but only within the extent that fluid
does not leak.
4) Remove wheel cylinder mounting bolts (1). Disconnect brake
pipe from wheel cylinder and put wheel cylinder bleeder plug cap
(2) onto pipe to prevent fluid from spilling.
PARKING AND REAR BRAKE 5C-13