Suzuki Wagon R Manual page 7

0A-2 GENERAL INFORMATION
1, (c)
1. Flywheel bolts or drive plate bolts for A/T vehicle
HOW TO USE THIS MANUAL
1) There is a TABLE OF CONTENTS FOR THE WHOLE MANUAL
on the third page of this manual, whereby you can easily find the
section that offers the information you need. Also, there is a
CONTENTS on the first page of EACH SECTION, where the
main items in that section are listed.
2) Each section of this manual has its own pagination. It is indicated
at the top of each page along with the Section name.
3) The SPECIAL TOOL usage and TORQUE SPECIFICATION are
given as shown in figure below.
6) Install oil pump. Refer to "Oil pump".
7) Install flywheel (for M/T vehicle) or drive plate (for A/T ve-
hicle).
Using special tool, lock flywheel or drive plate, and tighten fly-
wheel or drive plate bolts to specified torque.
Special Tool
(A): 09924-17810
Tightening Torque
.
(c): 78 N m (7.8 kg-m, 56.0 lb-ft)
4) A number of abbreviations are used in the text.
For their full explanations, refer to "ABBREVIATIONS MAY BE
USED IN THIS MANUAL" of this section.
5) The SI, metric and foot-pound systems are used as units in this
manual.
6) DIAGNOSIS are included in each section as necessary.
7) At the end of each section, there are descriptions of SPECIAL
TOOLS, REQUIRED SERVICE MATERIALS and TIGHT-
ENING TORQUE SPECIFICATIONS that should be used for the
servicing work described in that section.