Suzuki Wagon R Manual page 88

PUSH
(G)
Obverse side Back side
LIP SEAL
REMOVAL
1) Remove magnet clutch, referring to "MAGNET CLUTCH" in this
section.
2) Remove front head (1) mounting bolts (a), (b).
3) Remove front head (1) by pushing cylinder shaft (2).
NOTE:
Be careful not to remove cylinder from front head.
4) Remove O-ring.
3. Cylinder
4. Case
5. O-ring
5) Remove lip seal from front head using special tool (G).
Special Tool
(G): 09923-73210
INSTALLATION
1) Press-fit lip seal (1) into front head (2) using special tool (E).
(E)
Special Tool
(E): 09991-06050
CAUTION:
Do not reuse mechanical seal once removed from com-
pressor.
2
AIR CONDITIONING (OPTIONAL) 1B-29