Suzuki Wagon R Manual page 10

WARNING:
SDM
D During service procedures, be very careful when handling
a Sensing and Diagnostic Module (SDM). Never strike or
jar the SDM.
D Never power up the air bag system when the SDM is not
rigidly attached to the vehicle. All SDM fasteners must be
carefully torqued and the arrow must be pointing toward
the front of the vehicle to ensure proper operation of the
air bag system. The SDM could be activated when pow-
ered while not rigidly attached to the vehicle which could
cause deployment and result in personal injury.
WARNING:
Driver and Passenger Seat Belt Pretensioners
D For handling and storage of a live seat belt pretensioner,
select a place where the ambient temperature below 65°C
(150°F), without high humidity and away from electric
noise.
D Never carry the seat belt pretensioner by the wires or con-
nector on the underside of the pretensioner.
D When placing a live seat belt pretensioner on the work-
bench or other surface, it is also prohibited to put a seat
belt pretensioner on top of another. Otherwise, personal
injury may result.
D Never dispose of live (inactivated) seat belt pretensioners
(driver and passenger). If disposal is necessary, be sure
to activate them according to activation procedures de-
scribed in SECTION 10B before disposal.
D The seat belt pretensioner immediately after activation is
very hot. Wait for at least 10 minutes to cool it off before
proceeding the work.
D With many service procedures, gloves and safety glasses
should be worn to prevent any possible irritation of the
skin or eyes.
GENERAL INFORMATION 0A-5