Suzuki Wagon R Manual page 199

3E-6 REAR SUSPENSION
Body side
LATERAL ROD
REMOVAL
1) Hoist vehicle.
2) Remove lateral rod nuts (1).
3) Remove lateral rod (2).
INSTALLATION
1) Install lateral rod (1) to rear axle and vehicle body (3) referring
to figure for proper installing direction of bolt (4) and washer (2).
Tighten nuts (5) temporarily by hand.
FORWARD
Rear axle side
2) Lower hoist.
3) Tighten lateral rod nuts (1) to specified torque. It is the most de-
sirable to have vehicle off hoist and in non-loaded condition
when tightening them.
Tightening Torque
(a): 50 N
(b): 90 N
.
m (5.0 kg-m, 36.5 lb-ft)
.
m (9.0 kg-m, 65.0 lb-ft)