Suzuki Wagon R Manual page 56

HEATER CONTROL LEVER ASSEMBLY
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Disable air bag system, if equipped.
Refer to DISABLING AIR BAG SYSTEM in Section 10B.
3) Remove ashtray, center upper garnish (1), center lower garnish
(2), heater control knob (3), instrument lid (4) and radio or acces-
sory case (if equipped).
4) Disconnect each heater control cables (mode control, tempera-
ture control and fresh air control) from heater unit and air inlet
box.
5) Disconnect blower fan switch coupler and A/C switch coupler (if
equipped).
6) Remove heater control lever assembly (5).
7) Remove blower fan switch.
HEATER AND VENTILATION 1A-7
1. Heater control body assembly
2. Temperature control knob assembly
(& A / C switch, if equipped)
3. Blower fan & defogger switch assembly
4. Bulb
5. Fresh air control cable
6. Mode control cable
7. Temperature control cable
8. Fresh air control knob assembly
9. Mode control knob assembly