Suzuki Wagon R Manual page 43

0B-14 MAINTENANCE AND LUBRICATION
Wheel Bearing Inspection
1) Check front wheel bearing for wear, damage, abnormal noise or
rattles. For details, refer to FRONT SUSPENSION INSPEC-
TION of SECTION 3D.
2) Check rear wheel bearing for wear, damage abnormal noise or
rattle. For details, refer to REAR SUSPENSION INSPECTION
of SECTION 3E.
ITEM 6-3
Drive Shaft (Axle) Boot Inspection
Check drive shaft boots (wheel side and differential side) for leak-
age, detachment, tear or any other damage.
Replace boot as necessary.
ITEM 6-4
Suspension System Inspection
D Inspect front struts & rear shock absorbers for evidence of oil
leakage, dents or any other damage on sleeves; and inspect an-
chor ends for deterioration.
Replace defective parts, if any.
D Check front and rear suspension systems for damaged, loose or
missing parts; also for parts showing signs of wear or lack of lu-
brication.
Repair or replace defective parts, if any.
D Check front suspension arm ball joint stud dust seals for leakage,
detachment, tear or any other damage.
Replace defective boot, if any.
ITEM 6-5
Steering System Inspection
1) Check steering wheel for play and rattle, holding vehicle straight
on ground.
Steering wheel play "a": 0 – 30 mm (0 – 1.1 in.)
2) Check bolts and nuts for tightness and retighten them as neces-
sary. Repair or replace defective parts, if any.